Thinking of a trike ……. maybe

Something about this second hand exercise machine seems to have all the right tubes for scrapping together a trike. After disassembling the machine and putting some of the pieces back together with zip ties and tape this is what I’m starting with. Don’t know if I’ll go ahead with it yet.

Day 2 Still not sure yet but got this far. Front end still staged for photo but rear is complete.

Day 3 – Went with a Bacchetta Recurve seat. Created a pivot block for the seat base and welded it to the frame. Seat can be moved into two different positions on this block. I welded a bolt to each side of the rear of the frame to attach the bottom halves of the seat struts.

A few days later ….